Toshiba 203SD manual Misfeed in the Radf Option, Document feeder cover Radf jam release lever

TROUBLESHOOTING AND MAINTENANCE

4 Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The error indicator will go out and the ready indicator will light up.

Caution

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

D: Misfeed in the RADF (Option)

If the misfed original is at the top of the document feeder tray or in the exit area, follow procedure (A) to remove the misfeed. If the misfed original is inside the document feeder and is not visible, follow procedure (B).

(A)If the misfed original is at the top of the document feeder tray or in the exit area, open the document feeder cover and pull out the original. If the original resists your pulling, press down on the RADF jam release lever while pulling out the original. When finished, close the document feeder cover.

Document feeder cover

RADF jam release lever

(B)Open the document feeder cover. Next, open the RADF and rotate the roller in the direction of the arrow. If the misfed original is in the state (X), pull the original out as it feeds out into the exit area. If the misfed original is in the state (Y), pull the original down and out. When finished, lower the RADF and close the document feeder cover.

	Roller
(X)	8
	(Y)

Open and close the RADF to clear the error indicator. "RETURN X Note ORIGINAL(S) START TO RESUME" will appear in the display. Return

the indicated number of pages to the document feeder tray. Press the

[START] key ( ) to resume copying.

73