Toshiba e-STUDIO202L, 232, 282 manual 267, Save as File

Error code	Problem	What to do
2C6D	NIC system error	Turn the power OFF and then back ON. Retry the job in error. If
		the error still occurs, contact your service representative.
2C70	SMTP service is not	Ask your administrator to enable the SMTP setting.
	available
2C71	SMTP authentication	Check if the SMTP authentication method, login name and
	error	password are correct.
		If the SSL setting is enabled, check if the setting and the port
		number of SSL correspond to those of the server.
2C72	POP Before SMTP	Check if the settings of POP Before SMTP and POP3 are cor-
	error	rect.
2C80	Failed to process	Ask your administrator to confirm whether the Received Internet
	received E-mail job	Fax Forward is set.
2C81	Failed to process	Ask your administrator to confirm whether the Received Fax
	received Fax job	Forward is set.
2CC0	Job canceled	Job was canceled.
2CC1	Power failure occurred	Make sure that the power cable is connected properly and it is
		inserted securely. Resend the job.
Save as File
2D10, 2D12,	Illegal job status	Turn the power OFF and then back ON.
2D13, 2D20-		Retry sending. If the error still occurs, contact your service rep-
2D22		resentative.
2D11	Not enough memory	Wait for a while and retry the job. If the error still occurs, turn the
	for saving the scan job	power OFF and then back ON and retry it.	8
2D14	An internal error	Turn the power OFF and then back ON, and retry the job. If the
	occurred	error still occurs, contact your service representative.
2D15	Exceeding maximum	Divide the file into several files, or retry in a single-page format.
	file capacity
2D30	Failed to create direc-	Make sure that the access privilege to the storage directory is
	tory	writable and also the disk in the directory has enough space,
		and then retry the job. If more than one job is performed simul-
		taneously, the error may occur because the disk temporarily
		runs out of space. In this case, wait for a while and retry the job.
		If the error still occurs, turn the power OFF and then back ON,
		and then retry it.
2D31, 2D33	Failed to create file	Make sure that the access privilege to the storage directory is
		writable and also the disk in the directory has enough space,
		and then retry the job. If more than one job is performed simul-
		taneously, the error may occur because the disk temporarily
		runs out of space. In this case, wait for a while and retry the job.
		If the error still occurs, turn the power OFF and then back ON,
		and then retry it.
2D32	Failed to delete file	Make sure that the access privilege to the storage directory is
		writable and then perform it again. If the error still occurs, turn
		the power OFF and then back ON, and then carry it out again.
2D40	Failed to convert	Turn the power OFF and then back ON. Retry the scan. If the
	image file format	error still occurs, contact your service representative.
2D43	Encryption error.	Perform the job in error again.
	Failed to create file.	If the error still occurs, turn the power OFF and then back ON.
		Perform the job in error again.

267