TOSHIBA
4.2 Control Circuit and External Battery Interface Connections 15/25/30 kvA
The following illustrates the wiring connections of the Control Circuits, and Battery Interface Circuits.
(1) | Low Battery | Battery Connection | (3) | Battery Shunt Trip | ||
(+) | Positive | (4) | Battery Shunt Trip | |||
(2) | Battery Discharge | |||||
Negative | (5) | Battery Aux. | ||||
(3) | Fault | |||||
|
| (6) Battery Aux. | ||||
(4) | Not Used |
|
| |||
|
|
|
|
(5)Inverter Supply
(6)Inverter Supply
(7)P24A3
(8)Remote Run
(9)P24A3
(10)Remote Stop
(11)Bypass
(12)COMMON
(13)EPO
(14)EPO
4.2.1Recommended Wire Size and Torque Requirements UPS Control and Battery Interface 15/25/30 kVA
Minimum Wire Size and Torque Requirements
UPS Control and Battery Interface Circuits
USE MINIMUM 75 °C COPPER WIRING
TERMINAL
(TERMINAL #)
| 15/25/30 kVA | |||
|
|
| TIGHTENING |
|
AWG |
|
| TORQUE |
|
|
|
|
|
|
UPS CONTROL CIRCUITS |
| 8 | |
| |||
|
|
| |
BATTERY CONTROL |
| 8 | |
CIRCUITS |
| ||
|
|
| |
BATTERY | 4 |
| 51 |
| |||
|
|
|
*Indicates Class 1 wiring methods are to be used. Maximum Wire Size for Control Circuits is 12 AWG. Maximum for Battery is 2 AWG.
4200FA CT/XT User’s Manual | 24 |