118 4.SETTING ITEMS (ADMIN)
3.SETTING NETWORK FUNCTIONS (Cont.)
4
5
Specify the following items as required.
DHCP (OPTIONS)—Select whether or not the optional information (IPv6 address for the DNS server, etc.)
except the IPv6 address for this equipment, which is issued from the DHCPv6 server is used on this equip-
ment. Press the [ENABLE] button to use the information, or [DISABLE] button to not use it.
[IP ADDRESS]—Assign the IPv6 address for this equipment.
[PREFIX]—Assign the prefix for the IPv6 address.
[GATEWAY]—Assign the default gateway.
In “MANUAL” mode, you cannot select “DHCP (IP Address)” option.
6
Press the [ENTER] button.
Returns you to the NETWORK menu.
7
Continue to another network setting if required, then press the
[APPLY NOW] button.
The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network inter-
face card to apply the changes.
If Duplicate Address Detection (DAD) detects duplicate addresses, the message “IPv6 ADDRESS CONFLICT” is
displayed on the touch panel.