Toshiba 57Z3500E, 57Z3500A Adjusting the basic picture quality, Activating the black stretch

Using the TV’s features

Adjusting the basic picture quality

1 Press M, then press or to display the PICTURE menu.

					PICTURE	1/2
			Picture settings			OK
			Active Backlight Control			On
			Cinema mode			On
			Film Stabilization			Off
			meta brain PRO 100			On
			xvYCC selection
2			MENU Back		EXIT Watch TV
	Press	or		to select the Picture settings menu, then
	press Q.
				Picture settings		1/2
			Back light			100
			Contrast			100
			Brightness			50
			Color			50
			Tint			0
			Sharpness			0
3			MENU Back		EXIT Watch TV
	Press	or		to select an item you want to adjust, then
	press	or	to adjust the settings as required.
			Contrast			100
Selection					Pressing
Back light				darker		brighter
Contrast				lower		higher
Brightness				darker		brighter
Color				paler		deeper
Tint				reddish		greenish
Sharpness				softer		sharper

Notes:

•The Tint may only be adjusted on NTSC signal.

•In the PC input mode (- page 21), Color, Tint and Sharpness modes are not available.

Activating the black stretch

This function increases the strength of dark areas of the picture which improves definition.

1	Press M, then press			or to display the PICTURE
	menu.
				PICTURE	1/2
			Picture settings		OK
			Active Backlight Control		On
			Cinema mode		On
			Film Stabilization		Off
			meta brain PRO 100		On
			xvYCC selection
2			MENU Back	EXIT Watch TV
	Press	or	to select the Picture settings menu, then
3	press Q.
	Press	or	to select Black stretch on the 2nd page.
			Picture settings		2/2
			Black stretch		High
			MPEG NR		Low
			DNR		Auto
			Color Temperature		Cool

4 Press or to select High, Off, Low or Middle.

Black stretch High

Note:

In the PC input mode (- page 21), and double-window mode (- page 26) this mode is not available.

Activating the MPEG NR (Noise Reduction)

If the receiving signal of MPEG is a mosquito (grained) noise depending on the compression and conversion, the noise may be reduced when using this function.

1	From the Picture settings menu, press or to
	select MPEG NR on the 2nd page.
2	Press or to select Off, Low, Middle or High.
		MPEG NR	High

Note:

In the PC input mode (- page 21), and double-window mode (- page 26) this mode is not available.

Activating the DNR (Digital Noise Reduction)

If the receiving signal is weak and the picture is blurry, the picture may be improved when using this function.

1	From the Picture settings menu, press or to
	select DNR on the 2nd page.
2	Press or to select Auto, Off, Low, Middle, or
	High.
		DNR	Auto

Note:

In the PC input mode (- page 21), and double-window mode (- page 26) this mode is not available.

Selecting the color temperature

You can change the tone of the picture by selecting from three preset color temperatures: Cool, Natural or Warm.

1	From the Picture settings menu, press or to
	select Color Temperature on the 2nd page.
2	Press	or to select mode you prefer.
			Color Temperature	Cool
	Cool:	Lends a blue hue to the picture.
	Natural: Neutral
	Warm:	Lends a red hue to the picture.

MENU Back EXIT Watch TV

16