Using the TV’s features
Alternatively, you may adjust the bass boost level directly using t.
1 | Press tto display Bass boost level. | ||||||
|
|
|
|
|
|
|
|
|
| Bass boost | 70 |
| |||
2 |
|
|
|
| |||
|
|
|
|
|
|
| |
|
|
| |||||
While the Bass boost display is on the screen, press | |||||||
| or to adjust the Bass boost level. | ||||||
3 | To turn off the Bass boost, press tto display Bass | ||||||
| boost Off. |
|
|
|
| ||
|
|
|
|
| |||
|
| Bass boost |
| Off |
| ||
Note:
The Bass Boost effect is active only when the sound outputs from the speaker or an external woofer system.
Using an external woofer system
Connect an external woofer to the WOOFER output terminal located on the rear of the TV (- page 28).
1 Select the woofer External mode from the AV connection menu.
2 | From the SOUND menu, press | or | to select | ||
| External Woofer on the 2nd page. |
| |||
3 | Press | or | to select On. |
|
|
4 | Press to |
| select External Woofer level. | ||
5 | Press | or | to adjust the External Woofer level. | ||
6 | To turn off the External Woofer, press or to select | ||||
| External Woofer, then press | or | to select Off. | ||
Alternatively, you may adjust the External Woofer level directly using t.
1 Press tto display External Woofer level, then press or to adjust the External Woofer level.
2 To turn off the External Woofer, press tto display External Woofer Off.
Selecting the audio output
With the audio output function “Variable”, you can use the TV’s remote controller to adjust the sound volume of the external audio system connected (- page 28).
To select the sound volume from AUDIO output terminals:
1 | From the AV connection menu, press or to select |
| Audio output. |
2 | Press or to select Variable or Fixed. |
Note:
Make sure the volume control of your audio amplifier is set to a moderate listening level.
Other features settings
Selecting the timer menu
The Timer is especially useful if you want the TV to turn itself on or off after a selected period of time.
1 Press M, then press | or | to display the TIMER menu. | ||
|
|
|
|
|
|
|
|
|
|
|
| TIMER |
|
|
|
|
|
|
|
| Sleep timer |
| 00:00 |
|
|
|
|
|
|
| On timer |
| 00:00 |
|
|
|
|
|
|
| On timer Position | 01 |
| |
| MENU Back | EXIT Watch TV | ||
2
3 Press the Number buttons
4 Press Pto exit the menu. When setting the On timer, press or to select the On timer Position and enter
the program position number you want to watch. Set the Standby mode by pressing 1 on the remote control. Activation of the Timer is indicated by the green “On- timer indicator”, on the front of the TV (- page 8).
Notes:
•The TV will automatically turn itself off after approximately 2 hours if you do not operate the TV after turned on by on timer function.
• If you press and hold or to set the On or Off delay time, the timer display will set by 30 minutes, up to 12 hours 30 minutes.
Using the auto format
When the TV receives a true HDMI signal picture and the auto format is On, it will automatically be displayed in HDMI signal format, irrespective of the TV’s previous setting.
1 | Press M, then press | or | to display the FUNCTION | ||
| menu. |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FUNCTION |
|
|
|
|
|
|
|
|
|
| Teletext |
| Auto |
|
|
|
|
|
| |
|
| Teletext language | 1 |
| |
|
|
|
|
|
|
|
| Auto format |
| On |
|
|
|
|
|
|
|
|
| Blue screen |
| On |
|
|
|
|
|
|
|
|
| Side panel |
| 1 |
|
|
|
|
|
|
|
2 |
| MENU Back | EXIT Watch TV |
| |
Press or to select Auto format, then press or | |||||
to select On or Off.
20
