21
Advanced settings

Settings list

You may print a list of your e-STUDIO60F’s parameter
settings to monitor any changes made to the default
parameters!
Press M, 54 and OK.

Fax sett ings

Reception mode
If you want to receive fax messages with a modem
(with a PC) connected on the same telephone line as
the e-STUDIO60F, you must disable automatic fax re-
ception.
Press M, 241 and OK. Use / to choose MANUAL
(to disable automatic reception) or FAX (to receive
faxes on the e-STUDIO60F automatically).
Memory fax reception ( without paper)
When the paper is finished or the cartridges are empty,
faxes will be stored in the memory. You can disactivate
this function.
1 Press M, 242 and OK. Use / to choose one of
the following options:
WITHOUT PAP—faxes will be stored in the memory if
the printer is not available.
WITH PAPER—fax reception will be refused if the print-
er is not available.
2 Confirm with OK.
Number of copies
You may print incoming documents more than once.
Press M, 243 and OK. Enter a number (1 to 99) and
press OK.
Sorted printing
When you receive documents of several pages, they
will be received in the memory and then printed out in
the correct order. You can avoid this by de-activating
sorted printing:
Press M, 244 and OK. Use / to choose WITH or
WITHOUT and press OK.
Sorted sending
Documents of several pages are scanned into the
memory and then sent. You can disable this function.
Press M, 232 and OK. Use / to choose WITH or
WITHOUT and press OK.

SMS settings

When you select your country when setting up the
e-STUDIO60F, the parameters for SMS emission and
reception will be pre-set. If these settings do not work
or if you want to use another provider, you will need to
change these settings. Your SMS service provider will
provide the numbers you need.
SMS emission
1 Press M, 4611 and OK.
2 Enter the telephone number your machine has to
dial to send SMS messages. Press OK.
SMS reception
1 Press M, 4612 and OK.
2 Enter the telephone number to receive SMS mes-
sages. Press OK.
SMS alternative reception
You might wish to receive SMS from a second provider.
In that case you will have to enter a second telephone
number to receive SMS messages.
1 Press M, 4621 and OK.
2 Enter the second telephone number for SMS recep-
tion and press OK.
Automatic printing
Press M, 451 and OK. Use / to choose whether
SMS messages should be printed out automatically or
not and press OK.
Beep
Press M, 452 and OK. Use / to choose whether
the e-STUDIO60F should emit a beep to notify you
when an SMS message is received and press OK.
Sender name
Press M, 453 and OK. Use / to choose whether
SMS messages that you send should include your
name. Confirm with OK. (Enter the name using func-
tion 22)

Scan settings

Flatbed scanning
M, 271, OK—Resolution
M, 272, OK—Zooming
M, 273, OK—Origin
M, 274, OK—Contrast
M, 275, OK—Saturation