Toshiba 60F manual Redial L, Broadcast, Resolution f%F, Contrast O, Receiving faxes, Send report

2Press a and use /, a letter or a number key to choose a record or a list from the directory.

3Press Y to start the transmission.

Redial L

The last ten numbers dialled on the e-STUDIO60F will be stored in the redial memory.

1Insert a document.

2Press L as often as necessary. When the desired number appears on the display, press Y to start the transmission.

Broadcast &

You may choose to send a document to several recipi- ents.

1Insert a document.

2Dial a number (or use the directory or L) and press &. Repeat this step for up to ten recipients. Press

Y.

3If you want to cancel the transmission, press X twice.

Resolution f%F

If necessary, you may change the resolution. Press f%F as many times as necessary to select the re- quired mode. An icon on the display will show the cur- rent mode. If no icon is highlighted, the document will be sent in standard resolution.

standard—for good quality documents, without draw- ings or small details

f—for documents with drawings or small characters

%—for documents with very fine or small drawings

F—for photos

Contrast O

If the document is too light or too dark, you may change the contrast. Press O as many times as neces- sary to choose the desired contrast. The current setting is shown on the display.

Receiving faxes

If you don’t change the factory settings, faxes will be automatically printed. If the e-STUDIO60F has run out of paper or ink, incoming faxes will be stored in the memory.

After inserting paper or cartridges, start printing by pressing Y.

To change the fax reception settings, please refer to Advanced settings / Fax settings.

Fax answering device

The fax answering device allows you to keep docu- ments confidential by storing them. They need not be printed as soon as you receive them. The ; symbol on the display lets you know the state of the fax answer- ing device:

;on—fax answering machine is on

;blinking—documents are in the memory or are be- ing received

;off—memory is full

You can ensure document confidentiality by using the four-digit code. Once stored, this code is required to print fax messages and to activate/deactivate the fax answering device.

Storing an answer code

Press M, 343 and OK. Enter a four-digit code and press OK.

Activate/deactivate

Press M, 342 and OK. If you have stored an access code, enter it and press OK. Use / to select WITH or WITHOUT and press OK.

Printing messages

Press M, 341 and OK. If you have stored an answer code, enter it and press OK. Documents received and stored in the memory are printed and then deleted from the memory .

Send report

The e-STUDIO60F can print a transmission report every time you have sent a document. This way you are given confirmation that your document has been received.

1Press M, 231 and OK. Select one of the follow- ing options:

WITH—a report is given when the transmission was completed successfully or when it is completely aban- doned.

14