エラー
!
スタイルが定義されていません。
Replacement Procedures
エラー
!
ス
4.16 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-25.
1. Peel off the acetate tape and disconnect the Bluetooth harness from the connector
CN4440 on the system board.
2. Remove the following screw and Bluetooth holder (with the Bluetooth module).
M2.04B BIND screw 1
3. Remove the Bluetooth module from the Bluetooth holder.
M2.0x4B BIND
Bluetooth harness
Bluetooth holder
Bluetooth module
A
cetate tape
Guide
CN4440
Figure 4-25 Removing the Bluetooth module
4-42 [CONFIDENTIAL] QOSMIO F60 Maintenance Manual (960-796)