Toshiba A40 Working environment

User's Manual

Working environment

This product was designed to fulfil the EMC (electromagnetic compatibility) requirements to be observed for so
called "Residential, commercial and light industry environments".

TOSHIBA do not approve the use of this product in working environments other than the above mentioned "Residential, commercial and light industry environments".

For example, the following environments are not approved:

■Industrial Environments (environments with a mains voltage >230V~)

■Medical Environments

■Automotive Environments

■Aircraft Environments

If this product is supplied with a network port, please refer to the paragraph "Network connection".

Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA Europe GmbH.

The consequences of the use of this product in non
approved working environments may be:

■Interference with other devices or machines in the near surrounding area

■Malfunction of, or data loss from, this product caused by disturbances generated by other devices or machines in the near surrounding area

Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non
approved working environments before use. In the case of automobiles or aircraft, the manufacturer or airline respectively should be asked for permission before use of this product.

Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not permitted.

TOSHIBA A40 Series xi