HW Setup and Passwords
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard
ECP | Sets the port type to Extended Capabilities Port |
| (ECP). For most printers, the port should be set |
| to ECP. (Default) |
|
|
Standard | This setting should be used with some other |
parallel devices. | |
|
|
Display
This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted. (This setting is only available on Standard VGA mode and not available on Windows Desktop)
LCD + Analog RGB Selects both the internal LCD and external monitor for simultaneous display.
TOSHIBA A40 Series | 75 |
|
|