Toshiba A40 USB, Memory expansion

Troubleshooting

USB

Refer also to your USB device’s documentation.

Problem	Procedure
USB device does not	Check for a firm cable connection between the
work	USB ports on the computer and the USB device.
	Make sure the USB device drivers are properly
	installed. Refer to your Windows XP
	documentation for information on checking the
	drivers.
	If you are using an operating system that does
	not support USB, you can still use a USB mouse
	and/or USB keyboard. If these devices do not
	work, make sure the USB KB/Mouse Legacy
	Emulation item in HW Setup is set to Enabled.
	If problems persist, contact your dealer.

Memory expansion

Refer also to Chapter 8, Optional Devices, for information on installing memory modules.

Problem	Procedure
Beep sounds. (If slot A	Make sure the memory module installed in the
two beeps, If slot B	expansion slot is compatible with the computer.
three beeps, If both,	If an incompatible module has been installed,
two and three beeps.)	follow the steps below.
	1.	Turn off the power.
	2.	Disconnect the universal AC adaptor and all
		peripheral devices.
	3.	Remove the battery.
	4.	Remove the memory module.
	5.	Replace the battery and/or connect the AC
		adaptor.
	6.	Turn on the power.
	If problems persist, contact your dealer.

TOSHIBA A40 Series 9
17