Toshiba A40 Installing a memory module

Optional Devices

Installing a memory module

To install a memory module, make sure the computer is in boot mode then:

1.Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3.

2.Remove all cables connected to the computer.

3.Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power
Up Modes.)

4.Slide the display latch on the front of the computer to the right and open the display panel.

5.Insert your fingernail or a thin object under the rim of the keyboard brace and lift out the brace.

Removing the keyboard brace

6.Remove two screws securing the keyboard and one screw securing the metal brace. Lift off the metal brace.

Use a point size 0 Phillips screwdriver.

TOSHIBA A40 Series 8
5