Operating Basics

Drag’n Drop CD+DVD

Note the following limitations when you use Drag’n Drop CD+DVD:

■DVDVideo cannot be created using Drag’n Drop CD+DVD.

■DVDAudio cannot be created using Drag’n Drop CD+DVD.

■You cannot use Drag’n Drop CD+DVD’s music CD function to record music to a DVD±RW disc.

■Do not use the DISC Backup function of Drag’n Drop CD+DVD to copy DVDVideo and DVDROM with copyright protection.

■DVDRAM disc cannot be backed up with the DISC Backup function of Drag’n Drop CD+DVD.

■You cannot backup a CDROM or CDR/RW to DVD±RW using the DISC Backup function of Drag’n Drop CD+DVD.

■You cannot back up DVDROM, DVDVideo or DVD±RW to CDR/RW using the DISC Backup function of Drag’n Drop CD+DVD.

■Drag’n Drop CD+DVD cannot record in packet format.

■You might not be able to use the DISC backup function of Drag’n Drop CD+DVD to back up a DVD±RW disc that was made with other software on a different DVD±RW recorder.

■If you add data to a DVD± R disc that you have already recorded to, you might not be able to read the added data under some circumstances. It cannot be read in 16bit operating systems, such as Windows 98SE and Windows ME. In Windows NT4, you will need Service Pack 6 or later to read added data. In Windows 2000, you will need Service Pack 2 or Later to read added data. Some DVDROM and CDRW/DVDROM drives cannot read added data regardless of the operating system.

■Drag’n Drop CD+DVD does not support recording to DVDRAM discs. To record to a DVDRAM, use Explorer or other utility.

■If you try to back up a DVD disc to a DVDRW disc that was erased by the Quick erase option, you might get a error message. Use the Full erase option to clear the DVDRW disc and try again.

■When you back up a DVD disc, be sure the source drive supports recording to DVD±RW discs. If the source drive does not support recording to DVD±RW discs, it might not be backed up correctly.

Data verification

To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD.

1.Rightclick Data BOX and select Options to display the DATA DISC Option window.

2.Mark the Record and Verify check box and select Byte compare.

3.Click the OK button.

The Record and Verify function automatically checks whether data has been correctly recorded onto a CD/DVD. Byte compare compares the original data file with the data recorded on the CD/DVD and checks that the data completely matches.

TOSHIBA A40 Series

412