1. PRODUCT OVERVIEW
1- 9
1.4 Cutter Unit
This section describes the model with the Cutter Unit.
The model with the Cutter Unit is designed to cut the printed media.

1.4.1 Cut position

A cut position varies depending on media feed mode selected.
• Strict feed mode
In the Strict feed mode, the cut position is at the
centre of a gap, a notch or a black mark.
• Easy feed mode
In the Easy feed mode, the cut position is
approximately 1 mm from the leading edge of the
label positioned behind the cutter.
• Fixed length feed mode
In the Fixed Length feed mode, the media is cut
at equal interval of media pitch specified in the
printer driver.
A
cutter is located inside the Media Outlet.
Cut
p
osition
Media pitch specified in
the printer driver
Feed direction Cut position
Feed direction
Cut
p
osition