3. MEDIA AND RIBBON
3- 7
Handling the loaded media in the event of a media end or a ribbon end
In general, at the time of a media end or a ribbon end, printing on media that is about to be ejected
from the printer has not been completed.
If all print images have been printed on the media and non-print area remains, it looks as if printing
were completed. However, the printer does not determine that printing is completed unless an
entire page is completely fed.
In this situation, there are two options for restarting printing:
(1) If ［Yes］ is selected for [Reprint Error Page] in the Menu of the printer, printing will be
restarted from the most recently printed page at the time of media end or ribbon end.
(2) If ［No］ is selected, printing will be restarted from the page subsequent to the most recently
printed one at time of Media End or Ribbon End. (→ 8. OPERATION PANEL)