3. MEDIA AND RIBBON
3- 2
3.2 Die-cut label “Die-cut label” refers to a label stock of which labels are die cut one by one and surroundings are
removed, as illustrated below.
When a die-cut label stock is loaded, either the Transmissive Media Edge Sensor or the
Transmissive Media Centre Sensor is used to detect a print position. The Transmissive Media
Centre Sensor is located at the centre of the label feed path. (→ 1.3 Part Names and
Functions)
Precautions
･ The Transmissive Media Edge Sensor must be placed so that it does not come into contact with
the media.
Media feed direction
Label pitch
5 to 1,000 mm
Transmissive Media
Edge Sensor
Page start line
25 mm
Gap
2 to 13 mm
20 mm or less
R2 mm or less
15 to 120 mm