Toshiba Digital Recording and Transmission System, EHV Hybrid H.264 DVR manual Upgrade Firmware

Embedded DVR User Guide

System Configuration Continued

Use DST – After completing the Time Zone setup, highlight USE DST and press Enter to turn Daylight Saving Time ON / OFF.

NTP Type – Highlight NTP (Network Time Protocol) and press Enter to SYNC the DVR with the Network Time. Keypad Beep – ON / OFF [Enables / Disables Audible keypad touch confirmation].

Auto Log Off – OFF or 1-10 Minutes [This feature will close the Configuration Menu after XX minutes of inactivity. This is a security feature.]

S/W Upgrade – Start firmware upgrade from selected media (USB)

Upgrade Firmware

1.Press SETUP on the front panel or remote control. or

Click TOOL on the hover menu and select SETUP.

2.Select SYSTEM > SYSTEM CONFIGURATION.

3.Click S/W UPGRADE to open the UPGRADE FIRMWARE window.

4.Insert the USB device.

5.Select the media type (USB HDD/STICK).

6.Click SCAN.

7.Click OK to start the upgrade.

________________________________________________________________________________________________________

25