Embedded DVR User Guide
___________________________________________________________________________________________________ _____
47
Alarm Monitor
Send event information to a remote client, like SCS, using the Alarm Monitor software.
1. Select SEND TO ALARM MONITOR and press Enter to select ON.
2. Select the types of events to send to the Emergency Agent
(MOTION, SENSOR, MOTION + SENSOR.)
3. Enter the IP ADDRESS of the remote client.
4. Enter the PORT number.
Note The port number selected is the port that Alarm Monitor uses on the remote PC. The port shown in t his screen
must match the port shown in Alarm Monitor or SCS and the port must be open on the remote PC.