Toshiba EN-2 user manual Initial Use, Adjusting the Video Settings Windows Vista Operations

dynadock™

The DVI component additionally supports:

Resolution/	1600x1200
Color Depth
16 bit	60
32 bit	80

Note that interlaced modes are not supported.

Additional modes may be offered, depending upon the connected monitor, but these are not currently guaranteed.

If the monitor does not advertise the supported modes, the VGA or DVI component will choose a set of common screen modes.

If cloning the primary display, the VGA or DVI component will try to use the preferred monitor mode. In some cases, this may not be the most appropriate mode for the mirrored desktop. It is recommended that the primary display resolution be changed to closer match the default resolution of the dynadock monitor.

NOTE: For more information on supported modes, be sure to check the documentation supplied with your monitor.

Initial Use

When the VGA or DVI component first starts, it will mirror the primary monitor. Changes to the screen mode and VGA or DVI component operation mode can be made under the Windows display properties.

If no output is seen on the monitor connected to the VGA or DVI component, it may be in a mode which cannot be displayed by the monitor. This can happen if the monitor does not report its supported modes to the VGA or DVI component. Reduce the resolution of the primary display, and in turn the resolution of the VGA or DVI component display until an image is shown.

NOTE: Placing the monitor into an unsupported mode for long periods can damage it.

Adjusting the Video Settings - Windows Vista® Operations:

1.Position the mouse anywhere on your computer desktop, right-click and select Personalize, then click Display Settings.

2.To change the screen resolution or color quality, select those options on the screen. Be sure to select one of the supported resolutions and color quality numbers in the table above. For an external monitor, you can also select any resolution or color quality supported by that monitor.

3.To change the refresh rate, on the Display Settings screen, click Advanced Settings and then click Monitor.

4.Select a refresh rate from the Screen refresh rate pull down list. Be sure to select a refresh rate that is supported for the resolutions and color depth settings, as indicated in the table above. Then click OK.

5.Click OK to close the Display Settings screen.

EN-38 User’s Manual