dynadock™
Disconnecting the dynadock™
Eject Dock
When the dynadock is connected to your computer, the TOSHIBA dynadock Utility can remove all devices with
1.
2.Select “Eject Dock” from the menu to start the eject process.
(Sample Image) Eject Dock screen
3. Wait before removing the dock from the system.
(Sample Image) Undocking screen
4.If the dock is removed from the system successfully, the icon in the system tray will disappear. Disconnect the USB cable from your computer’s USB port.
CAUTION: If the dynadock is not disconnected safely by following the above steps, or it is connected and then disconnected before it is detected by the PC, the icon will disappear too. However, it is not recommended, because it may cause loss of data and/or other damage to your PC and devices connected through the dock, especially when they are still working.
User’s Manual |
