Toshiba FC22, FC15 manual Placing the originals on the glass, Key in the number of copies sets

2 Place the original(s) on the original feed tray or on the glass.

Using the automatic document feeder:

Place them with facing up and align the side guides to the originals.

Stapling will be done in the position cor- responding to the upper left corner of the originals. However, in the 2 in 1 mode, stapling will be done in the position corresponding to the lower right corner (see page 72).

2 in 1 stapling position

Stapling position

●The number of the originals you can set up at a time is shown below.

Paper Weight	64~80g/m2		81~90g/m2		91~105g/m2
Mode	Sort	Staple	Sort	Staple	Sort	Staple
A5-R	—	—	—	—	—	—
A4	50	50	40	30	40	20
A3, A4-R, FOLIO	25	25	25	25	20	20
		(50)		(30)		(20)

( )=Manual Stapling

Placing the originals on the glass:	Stapling position
Place the original face down on the glass. If
you start with the last page of your originals,
the copies will be arranged in the same page
order as the originals.
The copies can be stapled in the position	USINGTHE
corresponding to the upper right corner of		OPTIONAL SORTER
the original.
In this case, however, copies are not stapled
automatically (see page 127 for manual
stapling).

3

4

Key in the number of copies (sets).

Up to 20 sets can be keyed in (all sizes).

Select the desired copy size, image density level, reproduction ratio, copy quantity, etc. as required.

125