Toshiba FC15, FC22 manual Precautions When Feeding Originals, Reversing automatic document feeder

4. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (OPTIONAL)

The optional Reversing Automatic Document Feeder automatically feeds and copies sheet paper originals placed on the feeding tray one at a time. This is called the “continuous feed mode.” You can also manually feed originals in one sheet at a time. This is called the “single feed mode.” If you feed in two-sided originals, this document feeder automatically reverses originals after they have been copied so that their reverse sides can be copied.

Precautions When Feeding Originals

1	Use originals with a paper weight in the range of 60 to 105 g/m2.
2	The number of the originals you can set up at a time differs depending on their size.
			60~90g/m2	91~105g/m2
		A4, A4-R, A5-R	50	40
		FOLIO	35	25
		A3	25	20
3	Do not use the following types of originals as they tend to misfeed or become damaged
	in the reversing automatic document feeder:

(1)Badly wrinkled or folded originals. In particular, originals

whose leading edge is curled may be misfed.

(2) Carbon paper

(4)Clipped or stapled originals

(5)Torn originals (including those with holes

in them)

(3) Taped originals

(6) Damp originals

(7) OHP film originals

4	Folded or curled originals should be smoothed out before
	being set on the reversing automatic document feeder.
5	Do not mix originals of different widths at the same time.
6	If the surface of the originals is so rough that they cannot
	be moved when two of them are pinched between two
	fingertips, or if the surface has been processed, these

originals could not be used because the automatic document feeder may not be able to separate them.

24