Toshiba FC22, FC15 manual Editing, Trim Mask

2	Using the original scale and the rear scale,
	specify the values defining the desired area
	as follows:
	●	X1	• •	Distance from the original scale to the
				left edge of the specified area
	●	X2	• •	Distance from the original scale to the
				right edge of the specified area
	●	Y1	• •	Distance from the rear scale to the
				upper edge of the specified area
	●	Y2	• •	Distance from the rear scale to the
				lower edge of the specified area

3

Specify the area of the original.

(To display the screen on the right, follow steps

1-3 in the "Procedure" below.)

● Key in the value X1 using the digital keys and

press the upper

key. If you key in a

SET

key.

wrong value, press the

RESET

● Values X2, Y1 and Y2 require the same

procedure as X1.

4

Press the lower

SET

key.

Procedure

1

Press the

EDIT

key to enter the Editing

menu, and then press the

key.

Next

2

Press the

EDITING

key.

3	Press the	TRIM	or	MASK	key.
4	Place the original face up on the glass with
	its bottom edge towards you and its top
	left aligned against the top left of the glass.

Tip: Only the standard size originals are available for this mode.

USING THE EDITING FUNCTIONS

85