Toshiba FC15, FC22 manual Image Repeat

13. IMAGE REPEAT (Cont.)

3	Place the original on the glass face up with
	its bottom toward you and with its top left
	aligned against the original scale on the

left side.

4 Following the “Specifying an Area” on page 84, key in the values of the area to be repeated (X1, X2, Y1 and Y2) with the digital keys and press the lower SET key.

●If the entire original will be repeated: X1=0(mm), Y1=0(mm)

X2, Y2=arbitrary

5	Place the original on the glass face down
	with its bottom toward you and with its
	top left aligned against the original scale
	on the left side.
6	Set the repeat number.
	● To change the repeat number:
	Press the		2	or	8	key to select the desired
	repeat number, and press the						SET	key.
	Tip:	If the repeat number is not set, the copier
		automatically repeats the original once.
		Only the length direction is available for
		repeat copying, and the original can be
		repeated up to 8 times.
7	Select the desired copy size, image density
	level, copy quantity, etc. if necessary.
8	Press the START key.
	Tip:	If the setting of the paper size or the

repeat number is not made appropriately, the image may not be copied completely.

92