Manuals / Toshiba / Computer Equipment / Webcam

Toshiba IK-TF5C instruction manual 7. 2 Menus, SHUTTER Electronic shutter

Models: IK-TF5C

1 36

Download 36 pages 20.96 Kb

Page 12

7. 2 Menus

7. 2 Menus

•Select the menu to change the setting by referring the item "7.1 Using the Menus".)

•When the [MENU UP], [MENU DOWN] buttons are pushed, the "→" on the screen moves up and down. Move the "→" to the item to change.

Note:

When performing the mode setting in the menu display while selecting ON in "PART" (refer to page 30) and E.TRG in "MODE", the display shows normal mode and then the camera returns the setting mode.

( 1 ) SHUTTER (Electronic shutter)

The electronic shutter has three modes; MANU (Manual), SS (Synchro. Scan), E.TRG (External trigger).

Set the "→" to "MODE" and push [DATA UP], [DATA DOWN] button to select the desired mode among "MANU", "SS", "E.TRG".

(1. 1) Changing each setting in MANU mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	MANU
MANU	50000
PART	OFF

<MODE = MANUAL>

•Sutter mode MANU, SS, E.TRG

•Sutter speed setting

OFF, 100 (1/100s), 250 (1/250s), 500 (1/500s) 1000 (1/1000s), 2000 (1/2000s), 4000 (1/4000s) 10000 (1/10000s), 25000 (1/25000s)

50000 (1/50000s)100000 (1/100000s)

*100 (1/100s) may not be specified in the mode except for PART (Partial scanning) OFF.

•Partial scanning switch OFF/120fps/180fps/E.120fps/E.180fps

(a) Changing the shutter speed

1Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.

(b) Partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF/120fps/180fps/E.120fps/E.180fps by pushing [DATA UP], [DATA DOWN] buttons.

12

Image 12

Toshiba IK-TF5C instruction manual 7. 2 Menus, SHUTTER Electronic shutter

Contents

For Customer Use FCC NOTICEFollowing information is only for EU-member states IK-TF5CSAFETY PRECAUTIONS Stop operation immediately when any abnormality or defect occursAvoid installing in a shower room or a bathroom Use the specified power supplyNote the following instructions when installing Do not put the product in direct sunshine and/or high temperatureAvoid setting in humid, smoky, vaporized or dusty places DisclaimerTABLE OF CONTENTS 3. ITEMS CONTROLLED BY USING6. OPERATION 1. CAUTIONS ON USE AND INSTALLATION 2. COMPONENTS3. ITEMS CONTROLLED BY USING ON SCREEN DISPLAY Available selections4. NAMES AND FUNCTIONS AWB DISP MENU DATA DC IN PAGE5. 3 Connector Pin Assignments 5. CONNECTION5. 1 Standard Connection 5. 2 Cautions on Connection6. OPERATION 6. 1 White Balance6. 2 Gain 6. 3 Shading Correction7. MODE SETTING BY ON SCREEN DISPLAY 7. 1 Using the Menus7. 2 Menus 1 SHUTTER Electronic shutter1. 2 Changing each setting in SS synchro. scan mode 1. 3 Changing each setting in E.TRG mode 1. 3. 1 Changing each setting in 1P SNR modea Changing the polarity of inputting trigger pulse setting b Changing 1P SNR exposure time setting1. 3. 2 Changing each setting in 1P SR mode a Changing the polarity of inputting trigger pulse settingb Changing 1P SR exposure time setting c Changing the partial scanning setting1. 3. 3 Changing each setting in PW SNR mode 1. 3. 4 Changing each setting in PW SR mode 2 GAIN Video gain 1. 3. 5 Changing each setting in RR modea Changing the partial scanning setting 2. 1 Changing each setting in GAIN3 WHT BAL White balance 3. 1 Changing each setting in AWB Automatic White Balance modea Changing color temperature setting 3. 2 Changing each setting in MANU Manual mode4 PROCESS 4. 4 Changing the shading correction mode4. 5 Changing the manual shading correction setting 4. 1 Changing master pedestal5 SYNC 6 OPTION5. 1 Adjusting horizontal phase 6. 1 Changing serial communication baud rate7 Setting to factory setting status 1 External sync signal polarity7. 3 External Sync 2 External sync frequency range2 Setting by the frame 3 Using the unit with external sync signal1 Setting by 1H 7. 4 Synchro. Scan Operation1 1P SNR 1 Pulse Trigger Sync Non Reset 7. 5 EXT TRIG External triggerNegative polarity mode Trigger*1 Positive polarity mode About 1 ∝s 2 1P SR 1 Pulse Trigger Sync Reset 2. 1 1 Pulse Trigger SYNC-RESET Picture Output Timing3 PW SNR Pulse width trigger SYNC-NON RESET Negative polarity mode Trigger*1 Positive polarity mode 4 PW SR Pulse width trigger SYNC-RESET 4. 1 1 Pulse Width Trigger SYNC-RESET Picture Output Timing5 RR Reset restart 5. 2 Input Timing Chart Example5. 1 Long Term Exposure 3 When Partial Scanning Mode is ON 7. 6 Partial Read1 Partial Scanning OFF All pixels scanning 2 Partial Scanning ON8. INPUT OUTPUT SIGNAL SPECIFICATOINS 1 HD Input Specifications3 Trigger Pulse Specifications 6 External HD/VD Input Phase Specifications9. CCD OUTPUT WAVEFORM TIMING CHART 1 Horizontal Output Waveform Timing Chart2 Vertical Output Waveform Timing Chart 10. SPECIFICATIONS The designs and specifications are subject to change without notice11. EXTERNAL APPEARANCE DIAGRAM 12. BEFORE MAKING A SERVICE CALLSymptom Items to be checkedLIMITED WARRANTY TOSHIBA CCD CAMERA