Partial Read, Partial Scanning on, CC2 | Toshiba IK-TF5C instruction

7. 6 Partial Read

( 1 ) Partial Scanning OFF (All pixels scanning)

In this mode, all pixels independent signal from the DIGITAL connector is output each 1/60 second (Line order output).

Video interval image

1/60s (525H)

( 2 ) Partial Scanning ON

In this mode, the pixel signal of the vertical center portion from the DIGITAL connector is output.

In the E.60fps or E.90fps mode, the partial scanning and the all pixels scanning can be switched by the DIGITAL terminal (CC2: partial scanning control signal).

CC2	E.120fps	E.180fps

‘L’	Partial scanning 120fps	Partial scanning 180fps

‘H’	All pixels scanning	All pixels scanning

Video interval image

1/120s (262H): When 120fps is selected

1/180s (175H): When 180fps is selected

( 3 ) When Partial Scanning Mode is ON

(Internal VD)

FVAL

LVAL,

DVAL

RGB data (video interval image)

Blanking interval	Video interval	Blanking interval
B	C	D	Total
			A

Video period

Mode	Total A	Blanking interval B	Video interval C	Blanking interval D

120fps	262H	18H	230H	14H

180fps	175H	23H	134H	18H

31

Image 31

Toshiba IK-TF5C instruction manual Partial Read, Partial Scanning OFF All pixels scanning, Partial Scanning on, CC2

Contents

Following information is only for EU-member states For Customer Use Safety Precautions Disclaimer Avoid setting in humid, smoky, vaporized or dusty places Table of Contents Components Available selections Items Controlled by Using on Screen Display Names and Functions Connection Connector Pin AssignmentsStandard Connection Result displayed Meaning OperationWhite Balance Automatic White Balance Manual White Balance Outline OFF Shutter speed mode is E.TRG modeGain Shading Correction Using the Menus Mode Setting by on Screen Display Shutter Electronic shutter Changing each setting in Manu modePartial scanning setting Menus Mode = SS Changing each setting in SS synchro. scan modeChanging the shutter speed setting Changing 1P SNR exposure time setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting Mode = E.TRG E.TRG = 1P SR Changing each setting in 1P SR modeChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SR Changing each setting in PW SR mode Changing the gain in Manu mode Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing each setting in Gain WHT BAL White balance Changing R pedestal Changing the shading correction modeChanging the manual shading correction setting Changing master pedestal Data UP, Down Menu UP, Down Adjusting horizontal phaseSync Option External Sync Setting to factory setting statusExternal sync signal polarity Shutter mode HD input VD input Horizontal phase adjustment Setting by the frameUsing the unit with external sync signal Setting by 1H Fval Lval Dval 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing EXT Trig External trigger Internal VD*3 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset PW SNR Pulse width trigger SYNC-NON Reset About 7 ∝s 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET Input Timing Chart Example RR Reset restartLong Term Exposure Partial Scanning on When Partial Scanning Mode is onPartial Read Partial Scanning OFF All pixels scanning Input Output Signal Specificatoins Horizontal Output Waveform Timing Chart CCD Output Waveform Timing ChartVertical Output Waveform Timing Chart RGB, 3CCD Specifications Before Making a Service Call External Appearance DiagramSymptom Items to be checked Step-by-step Procedures How to Obtain Warranty Service Limited One 1 Year Warranty of Labor and PartsImaging Systems Division