Manuals / Toshiba / Computer Equipment / Webcam

Toshiba IK-TF5C instruction manual 1. 3. 2 Changing each setting in 1P SR mode

Models: IK-TF5C

1 36

Download 36 pages 20.96 Kb

Page 15

(1. 3. 2) Changing each setting in 1P SR mode

(1. 3. 2) Changing each setting in 1P SR mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	1P SR
TRG.P
EXP.	16ms
PART	OFF

<MODE = E.TRG E.TRG = 1P SR>

•Sutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at 1P SNR and 1P SR

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

•Exposure time setting at 1P SNR and 1P SR

0.01ms0.02 ms0.4 ms1 ms16 ms

0.01 ms	0.02 ms	0.1 ms	1 ms
step	step	step	step

•Partial scanning switch OFF/120fps/180fps/E.120fps/E.180fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing 1P SR exposure time setting

1Set the "→" to EXP. by pushing [MENU UP], [MENU DOWN] buttons.

2Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

(c) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF/120fps/180fps/E.120fps/E.180fps by pushing [DATA UP], [DATA DOWN] buttons.

15

Image 15

Toshiba IK-TF5C 1. 3. 2 Changing each setting in 1P SR mode, a Changing the polarity of inputting trigger pulse setting

Contents

IK-TF5C For Customer UseFCC NOTICE Following information is only for EU-member statesUse the specified power supply SAFETY PRECAUTIONSStop operation immediately when any abnormality or defect occurs Avoid installing in a shower room or a bathroomDisclaimer Note the following instructions when installingDo not put the product in direct sunshine and/or high temperature Avoid setting in humid, smoky, vaporized or dusty placesTABLE OF CONTENTS 3. ITEMS CONTROLLED BY USING6. OPERATION 2. COMPONENTS 1. CAUTIONS ON USE AND INSTALLATIONAvailable selections 3. ITEMS CONTROLLED BY USING ON SCREEN DISPLAYAWB DISP MENU DATA DC IN PAGE 4. NAMES AND FUNCTIONS5. 2 Cautions on Connection 5. 3 Connector Pin Assignments5. CONNECTION 5. 1 Standard Connection6. 1 White Balance 6. OPERATION6. 3 Shading Correction 6. 2 Gain7. 1 Using the Menus 7. MODE SETTING BY ON SCREEN DISPLAY1 SHUTTER Electronic shutter 7. 2 Menus1. 2 Changing each setting in SS synchro. scan mode b Changing 1P SNR exposure time setting 1. 3 Changing each setting in E.TRG mode1. 3. 1 Changing each setting in 1P SNR mode a Changing the polarity of inputting trigger pulse settingc Changing the partial scanning setting 1. 3. 2 Changing each setting in 1P SR modea Changing the polarity of inputting trigger pulse setting b Changing 1P SR exposure time setting1. 3. 3 Changing each setting in PW SNR mode 1. 3. 4 Changing each setting in PW SR mode 2. 1 Changing each setting in GAIN 2 GAIN Video gain1. 3. 5 Changing each setting in RR mode a Changing the partial scanning setting3. 2 Changing each setting in MANU Manual mode 3 WHT BAL White balance3. 1 Changing each setting in AWB Automatic White Balance mode a Changing color temperature setting4. 1 Changing master pedestal 4 PROCESS4. 4 Changing the shading correction mode 4. 5 Changing the manual shading correction setting6. 1 Changing serial communication baud rate 5 SYNC6 OPTION 5. 1 Adjusting horizontal phase2 External sync frequency range 7 Setting to factory setting status1 External sync signal polarity 7. 3 External Sync7. 4 Synchro. Scan Operation 2 Setting by the frame3 Using the unit with external sync signal 1 Setting by 1H7. 5 EXT TRIG External trigger 1 1P SNR 1 Pulse Trigger Sync Non ResetNegative polarity mode Trigger*1 Positive polarity mode About 1 ∝s 2. 1 1 Pulse Trigger SYNC-RESET Picture Output Timing 2 1P SR 1 Pulse Trigger Sync Reset3 PW SNR Pulse width trigger SYNC-NON RESET Negative polarity mode Trigger*1 Positive polarity mode 4. 1 1 Pulse Width Trigger SYNC-RESET Picture Output Timing 4 PW SR Pulse width trigger SYNC-RESET5 RR Reset restart 5. 2 Input Timing Chart Example5. 1 Long Term Exposure 2 Partial Scanning ON 3 When Partial Scanning Mode is ON7. 6 Partial Read 1 Partial Scanning OFF All pixels scanning6 External HD/VD Input Phase Specifications 8. INPUT OUTPUT SIGNAL SPECIFICATOINS1 HD Input Specifications 3 Trigger Pulse Specifications9. CCD OUTPUT WAVEFORM TIMING CHART 1 Horizontal Output Waveform Timing Chart2 Vertical Output Waveform Timing Chart The designs and specifications are subject to change without notice 10. SPECIFICATIONSItems to be checked 11. EXTERNAL APPEARANCE DIAGRAM12. BEFORE MAKING A SERVICE CALL SymptomLIMITED WARRANTY TOSHIBA CCD CAMERA