Toshiba IK-TF5C instruction manual 5. 1 Standard Connection, 5. 2 Cautions on Connection

5.CONNECTION

5.1 Standard Connection

Lens

IK-TF5C

Less than 4 mm

Cable (not included)
DC IN 12V
Frame grabber board,	Monitor

DC power	image process
	equipment etc.
supply

5. 2 Cautions on Connection

•When connecting the camera cables, unplug the power source of the camera and the other equipment connected.

•We suggest using a C mount lens made for a 3CCD camera.

When using another lens, the best camera performance of this camera may not be obtained.

(For example, low resolution may occur, focus may be lost through the range of a zoom lens, and flare, ghost or shading may occur)

Furthermore, in order to avoid damaging the mounting portion of the camera head, use a lens which has projection dimension from the mounting base of less than 0.157"(4mm).

•For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounding type AC adaptor with the specifications described below.

Power supply voltage	: DC12V±10%
Current rating	: More than 830 mA
Ripple voltage	: Less than 50 mV(p–p)
Connector	: HR10A–7P–4S by HIROSE electronics Co. Ltd
	Pins 1, 2	: 12V
	Pins 3, 4	: GND

5. 3 Connector Pin Assignments

DC IN 12V

1+12V

2+12V

3GND

4GND

13

24

Connector used:

HR10A-7P-4PB

(HIROSE electronics

Co. Ltd) or equivalent.

DIGITAL				Function	I/O
1	GND	14	GND		–
2	X0-	15	X0+		O
3	X1-	16	X1+		O
4	X2-	17	X2+		O
5	Xcllk-	18	Xcllk+		O
6	X3-	19	X3+		O
7	SerTC+	20	SerTC-	Serial communication control (RXD)	I
8	SerTFC-	21	SerTFC+	Serial communication control (TXD)	O
9	CC1-	22	CC1+	Trigger pulse input	I
10	CC2+	23	CC2-	Partial scanning control	I
11	CC3-	24	CC3+	External HD input	I
12	CC4+	25	CC4-	External VD input	I
13	GND	26	GND		–

131

2614

Connector used:

12226-51000-00

(3M) or equivalent.

8