1. CAUTIONS ON USE AND INSTALLATION
• Carefully handle the units. | • Handling of the protection cap. | |
Do not drop, or give a strong shock or vibration to | Keep the protection cap away from children. Chil- | |
the camera. This may cause problems. Treat the | dren may put them into mouth or swallow them | |
camera cables carefully to prevent cable prob- | accidentally. The protection cap protects the im- | |
lems, such as cable breakdown and loosened con- | age sensing plane when the lens is removed from | |
nections. | the camera, do not throw away. | |
• Do not shoot intense light. | • When not using the camera for a longtime. | |
If there is an intense light at a location on the | Stop supplying power. | |
screen such as a spot light, a blooming and smear- | • When cleaning the camera. | |
ing may occur. When intense light enters, vertical | ||
Unplug the power source before cleaning. Clean | ||
stripes may appear on the screen. This is not a | ||
with a soft dry cloth only. Do not use benzine, al- | ||
malfunction. Ghosts may occur when there is an | ||
cohol, thinner, household detergents, chemically | ||
intense light near the object. In this case, change | ||
treated cloths, etc. If used, coating and printed | ||
the shooting angle. | ||
letters may be discolored. When cleaning the lens, | ||
• Install the camera in a location free from noise. | ||
use a lens cleaning paper, etc. | ||
If the camera or the cables are located near power | • Avoid using or storing the camera in the fol- | |
utility lines or a TV, etc. undesirable noise may | ||
lowing places: | ||
appear on the screen. In such a case, try to change | ||
Places filled with highly flammable gas. | ||
the location of the camera or the cable wiring. | ||
| ||
• Moire | Places near gasoline, benzene, or paint thinner. | |
Places subject to strong vibration. | ||
When thin stripe patterns are shot, stripe patterns | ||
| ||
that are not actually there (moire) may appears | Places contacting chemicals (such as pesticides), | |
as interference stripes. This is not a malfunction. | rubber or vinyl products for a long period of time. | |
• Operating ambient temperature and humidity. | • Preliminary confirmation of the location where | |
Do not use the camera in places where tempera- | the camera is installed (with a tripod not used) | |
| ||
ture and humidity exceed the specifications. Pic- | Before installing the camera, make sure that the | |
ture quality will lower and internal parts may be | location can withstand the total weight of the | |
damaged. | camera. | |
Be particularly careful when using in places ex- | If the camera is installed in places where the | |
posed to direct sunlight. When shooting in hot | strength of bearing it is insufficient, secure the | |
places, depending on the conditions of the object | structure by reinforcement etc., to bear the load. | |
and the camera (for example when the gain is in- | If the reinforcement strength is insufficient, the | |
creased), noise in the form of vertical strips or | camera may drop, causing personal injury and | |
white dots may occur. This is not a malfunction. | malfunction. |
2. COMPONENTS |
| |
(1) | Camera | 1 |
(2) | Accessories |
|
| (a) Instruction manual | 1 |
5
