Gain Video gain, Changing each setting in RR mode | Toshiba IK-TF5C

(1. 3. 5) Changing each setting in RR mode

	Move up down	Set by pushing
	By pushing
		DATA UP, DOWN
	MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	RR
PART	OFF

•Sutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Partial scanning switch OFF/120fps/180fps/E.120fps/E.180fps

<MODE = E.TRG E.TRG = RR>

(a) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF/120fps/180fps/E.120fps/E.180fps by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

( 2 ) GAIN (Video gain)

GAIN has two modes; MANU, OFF.

Set the "→" to MODE, push the [DATA UP], [DATA DOWN], and select mode among MANU, OFF. In the OFF mode, gain is fixed to 0dB.

(2. 1) Changing each setting in GAIN

Move up down By pushing

MENU UP, DOWN

Set by pushing

DATA UP, DOWN

-- GAIN --
MODE	MANU
MANU	0dB

•Gain mode MANU, OFF

• Manual gain -3 dB to 18 dB (10 dB step)

(a) Changing the gain in MANU mode

1Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the manual gain by pushing [DATA UP], [DATA DOWN] buttons.

18

Image 18

Toshiba IK-TF5C Gain Video gain, Changing each setting in RR mode, Mode = E.TRG E.TRG = RR, Changing each setting in Gain

Contents

For Customer Use Following information is only for EU-member states Safety Precautions Avoid setting in humid, smoky, vaporized or dusty places Disclaimer Table of Contents Components Items Controlled by Using on Screen Display Available selections Names and Functions Connector Pin Assignments ConnectionStandard Connection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed Meaning Shading Correction Shutter speed mode is E.TRG modeGain OFF Mode Setting by on Screen Display Using the Menus Menus Changing each setting in Manu modePartial scanning setting Shutter Electronic shutter Changing each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time setting Changing each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Changing each setting in PW SR mode Mode = E.TRG E.TRG = PW SR Changing each setting in Gain Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing the gain in Manu mode WHT BAL White balance Changing master pedestal Changing the shading correction modeChanging the manual shading correction setting Changing R pedestal Option Adjusting horizontal phaseSync Data UP, Down Menu UP, Down Shutter mode HD input VD input Setting to factory setting statusExternal sync signal polarity External Sync Setting by 1H Setting by the frameUsing the unit with external sync signal Horizontal phase adjustment EXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval Internal VD*3 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset About 7 ∝s PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing RR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning on Input Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCD External Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division