Toshiba MA-516-100 owner manual 125, Sale Total Tendered Amount, Allowed Prohibited

EO1-11116 MA-516-100 SERIES

Address:	7						→
			initial	SET	Bit	Nos.
		Your Selection ⎯→
([CHK TND] Key Function)

1 2 3

Bit No.	Content					Selective Status
					RESET					SET
1	Tender and Total Functions in finalizing
		TENDER or TOTAL						TENDER only
	a sale
2	Validation Print Content on
			SALE TOTAL				TENDERED AMOUNT
	Over-tendering
			PROHIBITED
3	Cashing with no purchase, using this key.								ALLOWED
4	Over-tendering (tendering an amount
	larger than the sale total, resulting in
				ALLOWED				PROHIBITED
	calculation of change due)

5 to 8

-- vacant --

Supplementary Description:
Bit 1:	RESET status	The key functions as Tender Key with a prior amount entry or as Total Key
		without any amount entry.
	SET status	The key always requires a tender amount entry.
Bit 2:	RESET status	Prints the sale total amount.
	SET status	Prints the tendered amount.
	In case of a short-tender, the tendered amount is always printed regardless of this bit status selection.
Bit 3:	RESET status	Customers’ checks cannot be cashed outside a sale.
	SET status	Customers’ checks can be cashed with no purchase outside a sale.
Bit 4:	This Bit status selection is effective only in tendering operation.
	SET status	If this bit is SET and also Address 11 - Bit 1 is SET (for Short-tendering
		Prohibited), an amount equal to the sale total is always required for tendering.

- 125 -