Toshiba MA-516-100 owner manual Validation Print, Validation Key, Initial Status for each Media

EO1-11116 MA-516-100 SERIES

Validation Print

VALI DATE

(Validation Key)

To perform a validation print of a sale item or a media entry, insert a validation slip to the Validation Slot and depress this key. The sale item or media data just entered is printed on the slip. Withdraw the slip to go on any other operation.

X MGR

REG

OFF

SET

-

Z

A required sale	Insert a slip to the	⎯→
item or media is	⎯→ Validation Slot.
entered.	(See the sketch below.)

VALI DATE

NOTES 1. On this register, depressing the [VALI- DATE] key will execute printing regard- less of presence/absence of a slip. Be- fore depressing the key; be certain to insert a slip to the Validation Slot. (If no slip is inserted. the validation print will occur over the last printed line on the receipt.)

2. After validation print, be certain to re- move the slip from the Validation Slot.

3.The number of validation print opera- tions are processed into the Validation counter in the report memory.

4.The following options are selective in relation to validation print (Refer to Chapter “22. System Option Setting” . Also refer to the print format on the next page.):

1)Non-print Selection Address 12 on page 130

Consecutive No. Non-print (Bit 2) ... Initial Status: Print

Cashier ID Non-print (Bit 3) ... Initial Status: Print

2)Number of times for validation print of the same item Address 12 - Bit 1 on page 130

Single-validation (only once allowed) (initial status), or Multi-validation (any number of times allowed)

3)Validation Print Content after each non-cash media tender Addresses 7 to 10 on pages 125 to 128

w	Sale Total Print, or Tendered Amount Print (Bit 2)
	Initial Status for each Media:
	[CHK TND] ... Tendered Amount Print
	[Chg] ...	Sale Total Print
	[MISC] ...	Tendered Amount Print

[CPN] ... Tendered Amount Print

(In case of a short-tender, the tendered amount is always printed regardless of the status selection above.)

- 93 -