HW Setup

Password

This tab allows you to set or reset the user password for power on.

User Password

Lets you register a new password or un-register an existing password.

Not Registered

Un-registers an existing password

Registered

Register a new password by following the on

 

screen instructions

Owner String

This blank field is used to display a message when the password field is displayed on startup. If a password is not registered the message will not be shown. The maximum length is 256 characters.

Display

This tab lets you select the internal LCD and/or external monitor when the computer boots up.

Power On Display

Lets you select the display to be used when the computer is booted (this setting is only available on Standard VGA mode and not available on Windows® Desktop).

Auto-Selected

Selects an external monitor if one is connected.

 

Otherwise, it selects the internal LCD (Default).

LCD + Analog RGB

Selects both the internal LCD and external

 

monitor for simultaneous display.

Boot Priority

Boot Priority Options

This option sets the priority for booting the computer.

To select the boot drive you want, follow the steps below.

1.Boot-up your computer and press F12 to enter the boot menu.

2.The boot select screen will be displayed: Hard disk Drive, CD/DVD, FDD and LAN.

3.Use the upper/lower cursor keys to highlight the boot device you want and apply.

User’s Manual

7-2