Operating Basics

■When you back up a DVD disc, be sure the source drive supports recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive does not support recording to DVD-R/-RW or DVD+R/+RW discs, it might not be backed up correctly.

■When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to use the same type of disc.

■You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite pro- cess:

1. Display the setting dialog box by one of the following two steps:

■ Click the Recording settings button(

) for writing on the main

toolbar in the Data Disc mode.

 

■ Select Setting for Each Mode  Data Disc in the Setting menu.

2.Mark the Verify written data check box.

3.Select File Open or Full Compare mode.

4.Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator information.

Video

You can record video using Ulead DVD MovieFactory® for TOSHIBA.

When using Ulead DVD MovieFactory® for TOSHIBA

How to make a DVD-Video

Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder:

1.Click  All Programs  MovieFactory for TOSHIBA  Ulead MovieFactory for TOSHIBA Launcher to launch MovieFactory.

2.Insert a DVD-RW or DVD+RW disc in Burner.

3.Click Video Disc  Burn Video to Disc to launch Direct Recording dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.

4.Choose DVD-Videoformat.

5.Confirm the capture source is DV.

User’s Manual

4-24