Getting Started
Chapter 3
Getting Started
This chapter provides basic information to get you started using your computer. It covers the following topics:
Be sure also to read the Instruction Manual for Safety and Comfort. This guide, which is included with the computer, explains product liability.
■Installing the battery pack
■Connecting the AC adaptor
■Opening the display
■Turning on the power
■Windows Vista™ setup
■Turning off the power
■Restarting the computer
■System Recovery Options
■Restoring the preinstalled Software
All users should be sure to read the section Windows Vista setup.
Installing the battery pack
To install a battery, follow the steps below.
■The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements.
■Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.
■Please do not push the power button before installing the battery pack.
1.Turn the computer's power off.
2.Disconnect all cables connected to the computer.
3.Insert the battery pack. The Battery Release Latch clicks into place.
User’s Manual |