Toshiba tecra s3 manual 4.20 CPU

4.20 CPU
Removing the CPU
To remove the CPU, follow the steps below and refer to Figure 4-30 and 4-31.
1. Remove the following screws securing the CPU holder, in the reverse order of the
number marked on the holder.
• M2×4B BIND screw ×3
2. Remove the CPU holder and CPU heat sink.
CPU heat sink
CPU holder
M2×4B BIND
Figure 4-30 Removing the CPU heat sink
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-47