Connecting a computer (COMPUTER IN 1 connector) | CONTENTS |
You can project the picture from the computer.
Check that the power supplies for the projector and for the computer are off before connecting the cables.
22
USB | MONITOR | COMPUTER IN 1 | COMPUTER IN 2 | |
| OUT | ( Y/PB/PR ) |
|
|
| CONTROL |
|
|
|
|
| AUDIO |
| VIDEO IN |
|
| IN | R - AUDIO - L | VIDEO |
COMPUTER IN 1 connector
For use as both analog RGB (1) and Y/PB/PR input. At shipping from factory, it is set for use as analog RGB (1) input.
AUDIO IN jack
For use as both audio signals for RGB input (analog RGB (1)/analog RGB (2)/ digital RGB) and Y/PB/PR input.
connectionsInstallation and
Connecting a Mac adapter for
Macintosh computers (supplied)
To COMPUTER IN 1 connector Be sure to connect in the proper direction.
To monitor port
RGB cable (supplied)
Computer
To AUDIO IN jack
Audio cable (supplied)
ø3.5mm stereo
Notes
•The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
•You may not be able to connect some computers to the projector. For details, consult the dealer.
•When connecting to a Macintosh computer, use the supplied Mac adapter (Multiple Scan 21 compatible). For some models the adapter is not required.
•Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing, resolutions, etc.
