Toshiba TLP780E owner manual Full Menu settings Default setting

FULL MENU settings - Default setting CONTENTS

You can set the Input source, projection mode, etc. from FULL MENU [Default setting].

The relationship between input source and item

Yes: Adjustable -: Not displayed

To operate FULL MENU, refer to page 44 .

Analog RGB(1)

Analog RGB(2)

Digital RGB

Y/PB/PR

Video

S-Video

Camera

Input source setting

COMPUTER IN 1

SET

: COMPUTER IN 1 connector is selectable with the INPUT button.

: On/Off with ENTER

Analog RGB(1)

SET

: Use COMPUTER IN 1 connector as Analog RGB (1) input.

Y/PB/PR

SET

: Use COMPUTER IN 1 connector as Y/PB/PR input.

: On/Off with ( ) or (

)

COMPUTER IN 2

SET

: COMPUTER IN 2 connector is selectable with the INPUT button.

Analog RGB(2)

SET

: Use COMPUTER IN 2 connector as Analog RGB (2) input.

Yes (common for all of the inputs)

Digital RGB

SET

: Use COMPUTER IN 2 connector as Digital RGB input.

VIDEO

SET

: Video input is selectable with the INPUT button.

S-VIDEO

SET

: S-Video input is selectable with the INPUT button.

CAMERA

SET

: Camera input is selectable with the INPUT button.

Projection mode

Standard

SET

The projector is set to the floor-mounted front projection mode.

Rear

SET

The projector is set to the floor-mounted rear projection mode.

Yes (common for all of the inputs)

Ceiling

SET

The projector is set to the ceiling-mounted front projection mode.

Rear ceiling

SET

The projector is set to the ceiling-mounted rear projection mode.

Background

Logo

SET

The TOSHIBA logo is displayed when no signal is input.

Blue

SET

The entire screen is set to blue when no signal is input.

Yes (common for all of the inputs)

None

SET

Nothing is displayed when no signal is input.

No signal power off

Off

SET

The power does not turn off automatically even if no signal status continues.

Yes (common for all of the inputs)

5 min.

SET

The power turns off automatically when no signal status continues for approx. 5 min.

Power on

Manual

SET

The power turns on by pressing the ON/STANDBY button.

Yes (common for all of the inputs)

Auto

SET

When the power plug is inserted, the power is on.

Start-up screen

On

SET

The start-up display appears when the power is turned on.

Yes (common for all of the inputs)

Off

SET

The start-up display does not appear when the power is turned on.

Reset

EXEC.

Return the settings of FULL MENU [Default setting] to the factory default values.

Yes (common for all of the inputs)

51

Settings	Adjustments
	&

Notes

•It is impossible to exit from the menu if no input source is selected.

•If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.

•In the following conditions, the function to detect no signal (“No signal background”, “No signal power off”) does not activate:

1)When “Video mode” 46 is set to the modes other than [Auto] and Video input or S-Video input is selected.

2)When “Signal format” 46 is set to the modes other than [Auto] and Y/PB/PR input is selected.

•Note that the projector automatically powers up at the restoration of power after a failure, if “Power on” is set to [Auto] with the power plug inserted.

•Even if “Power on” is set to [Auto], the setting of [5 min.] of “No signal power off” is effective.

•Each item can be set at all input sources, but the settings made at one input source are applied in common to all input sources.

•The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-plugged or if a power failure occurs while the projector is on, the settings are not memorized.