User’s Manual 5-3
The Keyboard
Press Fn + F11 to access the integrated keypad. When activated, the keys
with gray markings on the bottom edge become numeric keypad keys.
Refer to the Keypad overlay section in this chapter for more information on
how to operate these keys. The power on default for both settings is off.
Press Fn + F12 to lock the cursor on a specific line. The power on default is
off.
Hot keys
Mute:Turns the volume on and off.
Lock: Enters "Lock computer" mode. To restore your desktop, you need to
log on again.
Power plan: Displays the power save modes and lets you change the
power settings.
Sleep: This hot key switches the system to Sleep Mode.
Hibernate:This hot key switches the system to Hibernate mode.
Output: Changes the active display device.
+
+
+
+
+
+
Default resolution for simultaneous mode is set to 1024x768. If you
connect an RGB (Monitor) that is not 1024x768 resolution, change it in
"Display Properties".