
Operating Basics
2.Before recording the video to DVD
■When you record DVD disc, please use only discs recommended by the Drive manufacturer.
■Do not set the working drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD.
■Do not perform any of the following actions:
•Operate the computer for any other function, including using a mouse to TouchPad or closing/Opening the LCD panel.
•Bump or cause vibration to the computer.
•Use the Mode control button and Audio/Video control button to reproduce music or voice.
•Open the DVD drive.
•Install, remove or connect external devices, including the following: PC card, SD card, USB device, external display, i.LINK. devices, optical digital devices.
■Please verify your disc after recording important data.
■
■Not support to output VCD and SVCD format.
3.About Straight to Disc
■Not support to record on
■Not support to record DVD+VR format by HDV
■HDV support to burn
■
4.About recorded DVDs
■Some
■When playing your recorded disc on your computer, please use WinDVD software application.
■If you use an
Media care
This section provides tips on protecting data stored on your CD/DVD.
Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them:
CD/DVDs
1.Store your CD/DVD in the container they came in to protect them and keep them clean.
2.Do not bend the CD/DVD.
3.Do not write on, apply a sticker to, or otherwise mar the surface of the CD/DVD that contains data.
User’s Manual |