|
|
| Archer C9 | AC1900 Wireless Dual Band Gigabit Router |
|
|
|
|
|
| |
|
| Flashing | The router is identifying the device connected to the USB 2.0 |
| |
|
| port. |
| ||
|
|
|
| ||
| (USB 1) | On | The device is identified successfully. |
| |
|
| Off | No device is connected to the USB 2.0 port. |
| |
|
| Flashing | The router is identifying the device connected to the USB 3.0 |
| |
|
| port. |
| ||
|
|
|
| ||
| (USB 2) |
|
|
| |
| On | The device is identified successfully. |
| ||
|
|
|
|
| |
|
| Off | No device is connected to the USB 3.0 port. |
| |
|
|
|
|
|
|
| Note: |
|
|
|
|
After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.
1.4.2The Rear Panel
Figure 1-1 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
USB 2.0: The USB 2.0 port connects to a USB 2.0 storage device or a USB 2.0 printer.
Reset/WPS:
Pressing this button for less than 5 seconds enables the WPS function. If your client devices, such as wireless adapters, that support
- 5 -
