TP-Link AC1900 manual Wireless Security, II. Enter the client device’s PIN on the router

Archer C9 AC1900 Wireless Dual Band Gigabit Router

Use this method if your client device has a WPS button.

Step 1: Press the WPS/Reset button on the back panel of the router.

Step 2: Press and hold the WPS button of the client device. The WPS LED flashes for two minutes during the Wi-Fi Protected Setup process.

Step 3: When the WPS LED is on, the client device has successfully connected to the router.

II. Enter the client device’s PIN on the router

Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected Setup PIN number.

Step 1: Enable WPS. The default is enabled. Click the Add device button in Figure 5-15,then Figure 5-16will appear.

Figure 5-16 Add A New Device

Step 2: Enter the PIN number from the client device in the field on the WPS screen above. Then click Connect button.

Step 3: “Connect successfully” will appear on the screen of Figure 5-16,which means the client device has successfully connected to the router.

Note:

1)The WPS LED on the router will light blue for five minutes if the device has been successfully added to the network.

2)The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the wireless function is enabled before configuring the WPS.

5.4.3Wireless Security

Choose menu “Advanced→Wireless 2.4GHz→Wireless Security”, you can configure the security settings of your wireless network. There are five wireless security modes supported by the router: WPA-Personal,WPA2-Personal,WPA-Enterprise,WPA2-Enterprise, and WEP.

- 39 -