TP-Link AC1900 manual WAN Connection Type, Dynamic IP

Archer C9 AC1900 Wireless Dual Band Gigabit Router

4.Then WAN Connection Type page will appear as shown below. Select your connection type if you know what it is or click Auto Detect button; then follow the instructions to continue.

Note:

1)It's likely that you will skip Step 3 and jump to Step 4 in some situations, which is normal.

2)Make sure the cable is securely plugged into the Internet port before using Auto-Detect.

3)Auto-Detectsupports only three popular connection types, PPPoE, Dynamic IP, and Static IP. If your connection type is L2TP or PPTP, you need to manually select the very type and click Next to go on configuring.

Figure 3-4 WAN Connection Type

Dynamic IP

Choose to clone MAC address or not and then click Next to continue.

Figure 3-5 WAN Connection Type

- 10 -