Archer C9 AC1900 Wireless Dual Band Gigabit Router

5.2Network

Figure 5-2 the Network menu

There are three submenus under the Network menu as shown in Figure 5-2:WAN, MAC Clone, and LAN. Click any of them, and you will be able to configure the corresponding function.

5.2.1WAN

Choose menu “AdvancedNetworkWAN”, you can configure the IP parameters of the WAN on the screen below.

1.If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will automatically get IP parameters from your ISP. You can see the page, shown in Figure 5-3.

Figure 5-3 WAN – Dynamic IP

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the Release button to release the IP parameters.

- 26 -

Page 37
Image 37
TP-Link AC1900 manual Network, 1 WAN