Archer C9 AC1900 Wireless Dual Band Gigabit Router
Static IP - Connections which use static IP address assignment.
The router cannot detect PPTP/L2TP connections with your ISP. If your ISP uses one of these protocols, then you must configure your connection manually.
5.2.2MAC Clone
Choose menu “Advanced→Network→MAC Clone”, you can configure the MAC address of the WAN on the screen below, Figure
Figure 5-9 MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here.
WAN MAC Address - This field displays the current MAC address of the Internet port. If your ISP requires you to register the MAC address, please enter the correct MAC address into this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of Internet port to the factory default value. Click the Save button to save your settings.
Note:
Only the PC on your LAN can use the MAC Address Clone function.
5.2.3LAN
Choose menu “Advanced→Network→LAN”, you can configure the IP parameters of the LAN on the screen as below.
- 34 -