Back Panel, System Requirements | TP-Link TD-W8900GB specs

TD-W8900GB54M Wireless ADSL2+ Router User Guide

3.3The Back Panel

The Router's ports, where the cables are connected, and RESET button are located on the back panel.

Figure 3-2

¾Antenna: Used for wireless operation and data transmit.

¾Power: The Power plug is where you will connect the power adapter.

¾LAN 1,2,3,4: Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PC(s)

There are two ways to reset the Router's factory defaults:

1)Press the reset button of the Router, and then power on the Router, hold reset button pressed down for about five seconds,

2)Restore the default setting from “Management - Settings - Restore Default “of the Router's Web-based Utility.

¾Line: Connect to the Modem Port of Splitter or to the telephone line.

¾Make sure your computer has a Networking Interface Card (either wired or wireless is ok) before connecting the Router to your computer.

¾An operating system supporting the TCP/IP protocol.

¾Broadband Internet Access (ADSL).

¾Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later.