TP-Link manual TD-W8900GB 54M Wireless ADSL2+ Router User Guide, PPPoA

TD-W8900GB54M Wireless ADSL2+ Router User Guide

1.PPPoA

If you choose connection type PPPoA on the screen above (shown in Figure 5-5), you will see the screen below (shown in Figure 5-6). Follow the instructions to configure the WAN Interface.

Figure 5-6

1)Enter the PPP Username and PPP Password provided by your ISP exactly, select the Authentication Method in the drop-down list, the default method is AUTO, you can leave it as a default setting.

2)If you wish to active the “Connect on Demand” function, click the Dial on the demand radio-button, and enter the Inactivity timeout value, the range is from 1 to 4320 minutes. Then the Router will cut off the Internet connection after it has been inactive for a specific period of time (Inactivity Timeout). If your Internet connection is terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again.

3)If you are required to use a permanent IP address, select the option Static IP Address and enter the value in the text box.

4)Click the Next button to go to the next screen below (shown in Figure 5-7), or else click the Back button to return to the previous screen to make modifications.

)Note:

If you are not sure about the PPP IP extension and PPP Debug Mode, please don’t select this option.

22