TP-Link TL-SL3226P manual Annex A RJ-45 Plug/Connector Pin Specification, Connection

TL-SL3226P 24+2G Gigabit Managed Switch User's Guide

Figure 5-5

5.2.2Connection

We propose the IP address of the Switch is 192.168.0.2, you can input http://192.168.0.2/ in the IE to connect the Switch. Then press Enter, the following screen will exist.

TL-SL3226P 24+2G Gigabit Managed Switch User's Guide

Input the user's name and password (the default user's name and password are supervisor. Furthermore, the default user has managing right.) Press OK to the page of WEB management.

Caution

The default user's name and password are set in factory. You can revise and add user's names and passwords in the Security Configuration. You must have management right when you revising such configuration. If you reset the Switch to factory configuration, all users' names and passwords set before will disappear. There is only default user's name and password.

Like TELNET, WEB has two managing rights, Manager's right and user's right.

Annex A RJ-45 Plug/Connector Pin Specification

When connecting the Switch to another switch, a bridge or a hub, a normal cable is necessary. Please review these products for matching cable pin assignment. The following diagram and table show the standard RJ-45 receptacle/connector and their pin assignments for the switch-to-network adapter card connection, and the normal cable for the Switch-to switch/hub/bridge connection.

1 2 3 4 5 6 7 8

87654321

Figure 5-6

Figure A-1. The standard RJ-45 receptacle/connector