TP-Link TL-SL3226P Introduction, How to connect TELNET, Remark, TELNET/Out-of-Band Management

TL-SL3226P 24+2G Gigabit Managed Switch User's Guide

!The TL-SL3226P can start to work with the correct power supply. Please confirm whether the power supply is accordant to the requirements of the TL-SL3226P.

!In order to avoid the risk of the power-attach, don't open the shelf of the TL-SL3226P when it works. Don't open the shelf even without power.

!When the TL-SL3226P is connecting with the working stop, server, hub or other switches, the network cord must be less than 100m if the network cord is UTP.

!You must use Cat 3 or above UTP for 10Base-TEthernet.

!You must use Cat 5 UTP for 100Base-TX Ethernet.

!The module decides the operating speed of the extension slot. The 100M Module can work in 100M situations, while the 1000M modules can work in 1000M networks.

!When the TL-SL3226P is working, the network cord can be put into the port or put out from the port randomly, without breaking the operating of the TL-SL3226P.

!Before clean the TL-SL3226P, please unplug the power adapter. Don't clean with liquid.

!Don't put the TL-SL3226P near water or humidity; avoid water or humidity air into the shelf.

!Avoid the dust and strong electromagnetism.

Chapter 4 TELNET/Out-of-Band Management

4.1Introduction

TL-SL3226P 24+2G Gigabit Managed Switch User's Guide

Out-of-Band Management manages the Switch locally through the console port, without occupying the bandwidth.

Though TELNET and Out-of-Band have different presentation, their management contents are same. Both of them are to configure the Switch's characters.

4.2How to connect TELNET

Connect the management workstation to the management port on the Switch. You can directly use TELNET commend on the commend DOS prompt in the Windows Attachment.

The parameter following the TELNET commend is the IP address of the Switch which can be revised to adapt to the network. However, when you reuse TELNET to access, the parameter will be the Switch's IP address newly set.

There is limit to the users accessing times through TELNET, maximum 3 times. There is also time limit for the connection. The connection will be automatically broken if there is no operation in a limit time.

Furthermore, maximum 5 users can access to the Switch through TELNET at one time.

Remark:

Only the PC connecting to the management port can configure the Switch through TELNET or WEB.

Through TELNET you can realize Remote Log in to manage the Switch.